This guide will give you the most primordial vaping facts for newcomers. When it comes to vaping versus smoking there are worlds of difference between a thing and the other. Just picture yourself, it’s been years since you lit up your first butt. From a silly hobby to addiction, to be fed with it you feel that it’s time to try vaping for a change. Throw your cigs down the toilet and get the basic facts on vaping devices straight.
Table Of Contents
- How to Choose a Vaping Device
- Give it a Try
- Transition To Vaping
- Pens and Clearomizers
- Regulated Mods
- Gray Area Devices: Pods
- Not Recommended Devices: Squonk and Mech Mod
- Helpful Extras
The most important thing to consider at the moment of choosing a setup is where you are going to be vaping. Factors of portability, convenience and comfort have to be considered.
A box mod is more difficult to handle if on the move. A vape pen or clearomizer may feel limited for a sedentary person. An RDA would be very cumbersome to use while walking or hiking.
This guide will help you narrow down choices to your personal preference. Ultimately, once you try, you aren’t going to want to light up a single phallus of the devil anymore.
To give vaping your first try, go for a cheap disposable e-cigarette like the blu. They retail for around five dollars apiece. One of these lasts 400 puffs or around thirty cigarettes. There’s no recharging or liquid involved.
There aren’t big batteries, wires or chargers involved with this type. The grade of safety of these devices is high compared to dedicated setups.
Disposables are the new cigalikes. They are an evolution of the cartomizer-based cigalikes of the past. While using cartomizers was similarly inexpensive, they had non-disposable parts. You can get this kind of electronic cigarettes easily since they’re everywhere.
They come with liquid from the factory. The blu disposables, for example, come in many different grades of nicotine content. From 0% to 16%.
You are a smoker. You are sure that you want to transition to vaping definitively. In this case, it makes more sense to go for a durable setup. If you never smoked, but want to try vaping do it with 0mg nicotine liquid. The choice of vaping equipment doesn’t relate to the nicotine.
These devices require careful handling. They require batteries bought from reputable sellers and made by qualified manufacturers. On the user side, they need care too.
The best things to look for at the moment of buying a mod is to check the manufacturer’s reputation. Their certifications and social proof. Also, find out if their products are safe. Find a model you’d like to buy. When you find it, check for safety measures built into the material and logical designs. Like vents in the battery case, digital short-circuit protection and the like.
A vaping pen is a cylindrical and easily portable vaping device. They are capable of delivering vaporization in the three to five volts range. They support up to around 1000 mAh of charge. Two of these batteries are enough for a day, even if you want to vape constantly. Most batteries are charged with a USB cable or adapter that comes with the kits.
Some vape pen batteries have the by-pass function. The USB charger in by-pass capable batteries connects to the battery by micro-USB. In this way, you can vape while the battery is charging. One example of these batteries is the iTaste CLK!
A popular vape pen was the eGo C, by Joyetech. Probably the safest model of the eGo line. They had a re-fillable tank to plug in the atomizer unit. The tanks weren’t disposable but inexpensive if broken or lost.
Vape pens were superseded by clearomizers. Clearomizers are still pens, but with a tank system that is like a miniature RTA (see below). Some clearomizers use a kind of coil called BCC, for bottom changeable coil. Other types of clearomizer coils are dual coil and vertical coil.
- Atomizer head replacements: think two per month, but you can be lucky and make them last more than one month
- Tanks and Clearomizers: in case you break or lose them
- New set of batteries after x years
You can get anything from 0mg to around 30mg nicotine percentage. If you want to replace smoking you shouldn’t get any percentage below 18mg. If you feel that you don't get the cigarette experience, then get higher percentage liquid. Once you can exist without cigarettes, nicotine can be tapered out. You can buy liquid with less nicotine content to appreciate the flavors more.
You must also consider how are you going to vape. If it’s going to be once every forty-five minutes and a few drags in rapid succession, like a cigarette, get 18% or higher. If you plan to use your pen or clearomizer to vape constantly during the day, then get 16% or lower.
When buying as a beginner, remember it has to be a regulated mod. The other kind of vaping mods are mechanical mods and squonks. They aren’t recommended for beginners.
The modality for vaping with mods is sub-ohming. This practice is geared towards enhanced flavor and cloud production.
There is a wide range of models and prices. It may seem difficult to decide which one to get. An arbitrary standard to classify them could be how many batteries they require. Once you decide you want to have a mod with, say, just two batteries the choice narrows down considerably.
Rebuildable tank atomizers are either fully rebuildable or not, but all have a tank. Fully rebuildable are tank-atomizer combos that allow changing resistance coils. The other kind comes with some kind of replaceable atomizer. This latter category is just a modest improvement. You’ll still be buying something pre-made, like atomizer heads for a vape pen.
There are replaceable, pre-made atomizers. One example is the CCELL-GD used by the Guardian tank by Vaporesso. They last for around a month. These atomizers make for a very unpleasant experience by the end of their life-cycle.
The RDTA is more of a hybrid. It pairs the rebuildable atomizer deck of an RDA with the tank technology of RTAs. These devices are more like an RDA with the convenience of a tank. This type of RBA is not for all novices. There is a learning curve. You’ll notice it when you buy the materials. Also when you assemble the rebuildable resistances.
Basic electrical knowledge, like Ohm’s law and a few tools, are a must too.
You can buy the wire coils pre-made. Others make them themselves. What you must do is place them in the vaporizer, screw them and then wick them with cotton. That’s why I’m saying these aren’t for entry-level vapers who can buy a wholly pre-made solution like the eGo AIO Box.
If you start with an RDTA configuration, you can go RDA later using the box mod and an RDA. This isn’t possible with pre-made solutions were all the components are proprietary.
The choice of coil material depends on what kind of vaping style you want to achieve. Each has a different temperature mode and must be used only in that mode. It’s possible to get coils of materials such as kanthal that will only work on wattage (power) mode.
- Battery,if the mod doesn’t come with batteries
- A second set of batteriesand charger, if it’s not enough for a day vaping
- Replacement plug-in atomizersfor replaceable RBA
- Atomizer ohm meter(optional), these are neat devices where you screw the atomizer and get a reading
- Plierswith a cutting section: To manipulate and clip the wire coils
- Screwdriverto fix the coils in the atomizer. The tank/atomizer kit may include one
- Prebuilt wire coilsand cotton, for the wicks.
Once you put an RDA as vaporizer in your mod, it becomes something different. It can’t be denied that the flavor is different when you are using one of these. If you are fastidious about flavor, you must try an RDA.
You can buy a complete kit also and go straight the RDA way, without having used pens and RBAs before. All the pains of maintenance explained in the RBA/RDA hybrid apply. RDAs are for those that want to vape different flavors every day.
Dripping you can switch flavors on an hourly basis. Some flavor fanatics re-wick their atomizers daily. They do it to vape multiple flavors without tasting admixtures.
- The same things that RTA owners must buy
- Rubber gasketsthat keep the cap on the deck by pressure (replacements)
From 0% to around 6% is standard. It’s pretty much a trial and error and relative to the setup. A consensus would be anything above 10% is overkill.
Something I knew, albeit second-hand, after writing the original version of this article, were the pods.
First off, I want you to take this section of this feature with pincers and not take my word for it. I warned you like this because I haven’t had personal experience with pods.
Pods are controversial in the U.S. because they were targeted to teenagers and they became an epidemic among that demographic.
It may be pods gave vaping a bad name, maybe even as bad as the horror stories of tubes exploding and disfiguring people of back in the day. It may be not, I don’t know because I don’t know much on the vaping pod niche.
What I know is that they use a different kind of liquid called nicotine salts that are processed in a way the makes the process of the body taking up the nicotine an even more streamlined biologic mechanism than the already questionable freebase nicotine that normal liquids generate.
Besides, this new technology in both hardware and liquid introduces a very dangerous element of ignorance about the non-compatibility with the previous iteration of devices that use freebase nicotine juice instead of salts.
If you don’t know anything about salts, you may end up doing something as dangerous as messing with mech tubes or coils, and end up paying dearly for your error. That something could be trying to vape salts with a coil that was designed for freebase nicotine liquid.
I don’t know if this possibility is really so, what I know is that you have to be exceedingly lacking in the common sense department to do something as silly as trying to vape 28mg nic liquid in a tank designed for 6% like I did once.
That liquid, that was actually to use with a pen, felt as harsh on the mouth, throat and lung, as it tasted nasty, and totally off-key.
In a few words the problem with nic salts may be that someone who doesn’t knows what he or she is doing uses nic salts to on a sub-ohm device like the ones reviewed in this article.
Nic salts are 50/50 VC PG content, and are 50 milligrams of nicotine content, while the vape liquids for RDA/RTAs are on average 6 milligrams. They can be vaped on atomizers made for freebase, but only if you have control on the resistance wattage and build a specific wick meant only to vape salts.
On the bright side, the consensus about pods is that they are practically as effective as smoking a cigarette and have a great potential for helping people switch from cigarettes to vaping.
Most of the news about vaping accidents are because of fake products. Also, negligent use or abuse of genuine products, faulty batteries and user modding. Mechanical mods are the ones to blame the most. They are a very basic device. Mech mods evolved from tinkerers who created vaporizers out of flashlights.
Squonks are unregulated like mechanical mods and not recommended for beginners. Similar to box mods, they are bulkier than pens and clearomizers. They have a reservoir of liquid (squonk bottle) inside and feed the coil from below. Each time the coil runs out of liquid, a squeeze of the bottle replenishes the coil.
Not much different from the RTA/RDA hybrid type. The difference is that these dripping atomizers don’t have a tank. The drops of liquid are applied directly on the coil and the wick. The disadvantage of this kind of vaporizer is that you have to replenish the wick with liquid often.
These two extras prolong the lifetime of vaping devices
Heat sinks are a nice layer of protection for your device's 510 connector. They are similar to the heat sinks used in electronic devices like CPUs. If you plan on dry-burning your coils, a heat sink is a must.
Battery chargers will guarantee you two things. First, minimal use to non-use of the USB port of the mod, bypassing the risk of connecting it directly to the electric plug. And second, they have features to check your device's batteries, and to marry them if they have different charges.
The market for vaping devices has grown so much that choice became overwhelming. I didn’t recommend any device in particular because that would be very objective. Once you learned the basics you can get down to specifics. Do this by getting in touch with online vaping communities.
Until now, I haven't had time to sit down and write my vaping story. I hope this helps you, even if it is just to entertain yourself reading it (I hope), and others who need to know that it is possible to get rid of the smelly ones 100%.
I started vaping in 2012, with generic disposable cartomizers. I was always a cigs-head and if told that in the future I was going to end up kicking the habit, I never would have believed it.
Soon after trying the cartos, I acquired a pen, Ego-C manufactured by the Joyetech brand. I remember using 21% of nicotine and while I enjoyed it, it was never enough for me.
Do not forget that the pens were something like 3-5 watts, if I remember correctly. I tried to quit smoking with these kinds of gadgets, but I couldn't.
Maybe if I had used 28%+ nicotine content liquids, I could have stopped the death sticks in 2012, but it took me until May 2017 to start seeing windows where I spent days without touching cigarettes.
In the end, the important windows like whole weeks and months without tobacco, I achieved them by combining the use of a mod and a pen. I vaped 6% with the mod and 18% -16% with the pen.
Now I know that industrial original liquids like Hangsen, while not fancy or premium like, say, Halo, are cool, and a must-have aid to quit smoking. Personally I think that flavors like USA Mix and Desert Ship by Hangsen are special things for those who do not believe that it is possible to stop smoking without suffering.
When I began to know and love artisan liquids I was able to get rid of the outdated vape pens, and of industrial liquids, and use only one mod. I keep vaping at 6% and while I will try to go down to 3% one day, it is not an immediate priority.
My conclusion: You can quit completely and it comes down to finding what works for yourself. It took me five 5 + 2 years (five of unsatisfactory vaping and smoking, plus 2 with relapses), but I made it. I hope you'll be able to achieve it too.
© Martin Wensley 2019-2020